Abstract This study describes a new finite element method that can be used to analyse transverse and axial vibrations of a Functionally Graded Material (FGM) beam under an accelerating / decelerating mass. The differential equations of the FGM beam are obtained using First-order Shear Deformation Theory (FSDT). In these equations, the interaction terms of mass inertia are derived from the second-order exact differentiation of displacement functions with respect to mass contact point. The FGM beam is made of two different materials (Steel and Alumina Al2O3), which vary in thickness with a power law. Including the effects of neutral axis shift and mass inertia, the proposed method can be used when the dynamic behaviour of the FGM Timoshenko beams is to be analysed in transverse and axial directions, depending on the interaction with the acceleration of the moving loads. After validating this work with literature studies, new investigations and findings are presented for both moving load and mass assumptions. In addition, the obtained results of Timoshenko Beam (TBT) and Euler Bernoulli beam theory (EBT) are compared for FGM beams with various speeds and accelerations of moving mass.

Abstract In this paper, dynamic analysis of two different weapon systems (35 mm Anti-Aircraft Barrel (AAB) and 120 mm Grooved Tank Barrel (GTB)) under the effect of statically unbalanced projectile has been performed with a new 12 DOF 3-D element technique using Finite Element Method (FEM). The muzzle deviations, which negatively affect the barrel shooting accuracy at firing, are calculated in a time dependent manner using Newmark β algorithm with high accuracy at both axes (y and z) considering the Coriolis centripedal and centrifugal forces. The effect of such fundamental physical parameters as shift from rotating center and angular velocity belonging to the unbalanced projectile on barrel dynamics are analyzed with this new and affective FEM. As a result, it was found out that 1% of a millimeter shift from projectile belonging to a weapon system leads to excessive vibration on both axes and compromises the shooting accuracy of the barrel.

Abstract For realistic applications, design and control engineers have limited modelling options in dealing with some vibration problems that hold many nonlinearity such as non-uniform geometry, variable velocity loadings, indefinite damping cases, etc. For these reasons numerous time consuming experimental studies at high costs must be done for determining the actual behaviour such nonlinear systems. However, using advantages of multiple computational methods like Finite Element Method (FEM) together with an Artificial Intelligence (ANN), many complicated engineering problems can be handled and solved to some extent. This study, proposes a new collective method to deal with the nonlinear vibrations of the barrels in order to fulfil accurate shooting expectancy. Using known analytical methods, in practical, to determine dynamic behaviour of the barrel beam is not possible for all conditions of firing that include numerous varieties of ammunition for different purposes, and each projectile of different ammunition has different mass and exit velocity. In order to cover all cases this study proposes a new method that combines a precise FEM with ANN, and can be used for determining the exact dynamic behaviour of a barrel for some cases and then for precisely predicting the behaviour for all other possible cases of firing. In this study, the whole nonlinear behaviour of an antiaircraft barrel were obtained with 3.5% accuracy errors by ANN trained by FEM using calculated analysis results of ammunitions for a particular range. The proposed FEM-ANN combined method can be very useful for design and control engineers in design and control of barrels in order to compensate the effect of nonlinear vibrations of a barrel for achieving a higher shooting accuracy; and can reduce high-cost experimental works.